Niobium and tantalum carbide clusters have been isolated in the gas phase and irradiated with intense tunable infrared (IR) light. Stable neutral clusters are selectively ionized and subsequently detected in a mass spectrometer. By tuning the IR frequency, infrared multiphoton absorption spectra are obtained for a whole range of clusters. These mass-selective IR spectra lead to insights into th...

In this study, mechanochemcical process(MCP) is applied to synthesize ultrafine TaC powders. In this research, nano powder composite TaC-TaB2 was produced using mixtures of tantalum carbide and boron carbide as raw materials via mechanochemical process. The phase formation characterization during process was utilized by X-ray diffractometry (XRD). The morphology of synthesized powder was studie...

Inductively coupled plasma optical emission spectroscopy (ICP-OES) was used to measure the concentrations of cobalt, tantalum, titanium, vanadium and chromium in solutions of tungsten carbide. The main advantage of the method described here lies in the speed, convenience and effectiveness of the dissolution procedure. Aliquots of powdered tungsten carbide were dissolved in a solution of 5% aqua...

The thermogravimetric analysis on TaC, HfC, and their solid solutions has been carried out in air up to 1400 ◦C. Three solid solution compositions have been chosen: 80TaC-20 vol % HfC (T80H20), 50TaC-50 vol % HfC (T50H50), and 20TaC-80 vol % HfC (T20H80), in addition to pure TaC and HfC. Solid solutions exhibit better oxidation resistance than the pure carbides. The onset of oxidation is delaye...

We investigated SiC-based hydrogen gas sensors with metal-insulator-semiconductor (MIS) structure for high temperature process monitoring and leak detection applications in fields such as the automotive, chemical and petroleum industries. In this work, a thin tantalum oxide (Ta2O5) layer was exploited with the purpose of sensitivity improvement, because tantalum oxide has good stability at high...

The paper presents the results of metallographic studies and tribotechnical tests samples medium-carbon steel 34KhNi3MoA coatings obtained by laser surfacing a powder multicomponent charge based on iron cobalt in ratio 3:1 with additives nano particles tantalum carbide. were processed circular defocused beam transverse oscillations normal to scanning speed. Comparative for friction wear carried...

Ultrafine tungsten carbide-nickel (WC-Ni) cemented carbides with varied fractions of silicon carbide (SiC) nanowhisker (0-3.75 wt.%) were fabricated by spark plasma sintering at 1350°C under a uniaxial pressure of 50 MPa with the assistance of vanadium carbide (VC) and tantalum carbide (TaC) as WC grain growth inhibitors. The effects of SiC nanowhisker on the microstructure and mechanical prope...